160, 200, 260, 310 - Mirror Mounts
|
| Related Products |
 |
| |
|
|
• |
Moment arm length is 1.6 in., 2.0 in., 2.6 in., and 3.1 in. |
|
|
• |
Excellent choice for 0.5" to 4.0" optics |
|
|
• |
US and Metric sizes available. |
|
|
|
| |
We want your Feedback
See what's in stock NOW
|
OverviewSpecsFAQsCustomizeDownloadsCool-Tips
Series 160, 200, 260, and 310 mirror mounts are ideal for compact setups and general beam-steering applications. Standard models are available for 0.50-inch to 4.00-inch-diameter mirrors. The beam height is kept constant through individual series.
Series 160 is a compact, cost effective solution for day-to-day use while mataining adequate sensitivity, stability and preformance.
Series 200 with 80-pitch adjusters, have that same resolution as smaller mounts with the more expensive 100-pitch adjusters.It is the most versatile offering with 8 different optics diameter available.
Model 260-30 is the most compact, cost-effective precision 3.00-in. mirror mount available.Tilt range is ±4.8° with 13 μradian sensitivity. Stability is assured by a 0.75-inch-thick back plate and stiff springs. 3SC models provide ±5.5 mm of focusing range.
Series 310 accomodates larger optics up to 4.00 inch in diameter with a sturdy 0.75 inch thick frame and a 0.44 inch thick movable plate for increased stiffness.
Add 'M' for metric, '-LK' for locking screws, and/or '-3SC' for third adjustment screw.
|
Generic Conventional Mirror Mount Layout
|
Conventional Mirror Mount Fastening Options with M4 (8-32) clearance holes or M6 (1/4-20) threaded holes
|
Conventional Mirror Mounts 160-05
|
| Specifications | |
| Adjustment Screw Qty | 2 (3 optional) |
| Adjustment Screw Thread | 80 TPI |
| Angular range | ±5.5° |
| Material | Black anodized aluminum |
| Mount Design | Kinematic |
| Optic Size (mm) | 12.7 to 50.8 |
| Sensitivity | 21 μrad/degree |
Frequently Asked Questions (FAQs)
| |
Thread pitch is the distance between adjacent threads measured parallel to the thread axis. From the standpoint of threaded drive mechanism like a micrometer or a thumbscrew, thread pitch defines travel for exactly one rotation of the knob. For example, since the 07 MAT 703 Fine-Touch thumbscrew has a thread pitch of 125um, its spindle will travel 125um per each rotation of the knob. Thread pitch for inch parts is specified in terms of threads per inch (TPI). |
| |
If this is happening, then you have mounted the translation stage with its micrometer pointed upwards and there are two ways to fix this problem: 1) Mount the translation stage so the micrometer is pointed down or, 2) remove the stage from the "L" bracket, mount any one of the 07 BMA-series mounting plates to the bottom of the stage and remount the stage on to the "L" bracket so that the top of the stage is in contact with the "L" bracket. |
| |
Rotating two wedge prisms of equal power about an axis parallel to their adjacent faces, a beam can be steered in any direction within 4X the wedge deviation angle. Wedge prisms can be held using the 07 HPW 001 wedge prism adaptor and can be rotated using the 07 HPR 221, 07 HPT 231 or the 07 HPT 731 polarizer rotators. |
| |
The one main advantage the flexure mount has over the kinematic mount is its ability to support heavier loads. The flexures provide significantly more vertical support than the springs in kinematic mounts. |
| |
Yes. In general, all drives (thumbscrew, micrometer, differential and motorized) with equivalent travel ranges have the same mounting interface. In this specific case, the 07 TLC 224 has a travel range of 13 mm as does the 07 MAT 703 so it will fit properly. |
| |
No, the drive can reach better resolutions. The micrometer has graduated markings or "incremental marks" whereas the thumbscrew drive does not. Since resolution is generally understood to be the smallest movement an actuator can make, it can be highly dependent on the person who makes the adjustment. For comparative purposes, resolution on drives with "incremental marks" is referenced in terms if the smallest incremental mark which on most micrometers is 10um. The actual smallest movement the micrometer can make is one half to a third of the smallest incremental mark. |
| |
It depends on how accurately you are able mount to your actuator. When mounting an actuator, the goal is to minimize contact-point friction. Contact-point friction is the result of a misalignment between the actuator tip and the contact point and obviously, a round tip interfaces to a flat contact point and vise versa. Contact-point friction for a flat-tipped actuator increases as the center of rotation of the actuator's spindle is offset from the center of the round contact point. For a round-tipped actuator, contact-point friction increased the more the axis of rotation of the actuator's spindle is angularly misaligned to the flat contact point. |
| |
Both types have advantages and disadvantages. Crossed-roller bearings can handle higher load capacities and are more resistant to permanent damage from drops but they tend to be more expensive and are more sensitive to bearing-way contamination such as dirt particulates. Ball bearings are less expensive and more resistant to bearing-way contamination owing to point contact with the bearing way. |
| |
The 2 OrthoPins are located in two separate compartments on the side of the stage opposite the micrometer. Setscrews must be removed to gain access to the OrthoPins. |
| |
Yes. You can motorize one of our 07 MHT 225 or 07 MHT 227 kinematic mirror mounts using two of either the 07 EAS 503 or 07 EAH 503 stepper-motor drives, and the 17 BSC 002 stepper-motor controller. Simply remove the thumbscrew drives from the mirror mount and replace them with the aforementioned stepper-motor drives. A third stepper-motor drives can be added as well if needed. |
| |
Yes. The 07 EAS 503/F or 07 EAH 503/F stepper-motor drives can be used to provide 13 mm of automated travel for a 40 X 40-mm center-drive translation stages. For mounting to an optical tabletop, either the 07 RPC 016 or 07 RPC 516 adaptor plate is needed depending on whether the stages is inch or metric. |
| |
Yes, by using either the 07 EAS 504/F or 07 EAH 504/F stepper-motor drive, and the 17 BSC 002 stepper-motor controller, any of the 65X65-mm translation stages with 1 inch (25 mm) of travel can be motorized. For mounting to an optical tabletop, the 07 ORA 509, 07 RPC 013 or 07 RPC 513 adaptor plates is needed. |
| |
Unfortunately this will not work. The micrometer in a 07 TLC 224 65X65-mm, 13mm travel translation stage or any 13-mm-travel translation stage has a 9.5-mm mounting diameter and the 25-mm travel micrometer has a 10-mm mounting diameter and will not fit. A 07 TLC 224/A, however, is available with 25 mm of travel. |
| |
There are no kitted systems available but one can be made from any of the 25-mm travel, 65X65 translation stages having a side-mounted micrometer and a 07 EAS 504/F stepper-motor drive. |
| |
A flexure is a, strictionless device that relies upon the elastic deformation (flexing) of a solid material. Sliding and rolling are entirely eliminated from the design. The flexure device is limited to applications where the required travel is typically no more than 10-15% of the major dimension of the device. In addition to having no internal friction, flexure devices have high stiffness, high load capacity, and high resistance to shock. They also exhibit a low sensitivity to vibration. Users should be aware that in all standard flexures, there is a second-order cross coupling between axis. This movement is called arcuate motion (travel is in an arc motion). For fine positioning applications as in fiber optic alignment, and integrated optics, this is seldom a problem. In addition, if precise rectilinear movement is required, then compound flexure devices eliminate the arcuate motion and are readily available. |
| |
There are three "traditional" technologies used in motion positioners — dovetails, ball bearings, and roller bearings. Each of these technologies have their respective strengths (e.g.: high load capability, long travel), however, they all have varying degrees of friction and stiction. This fundamental property causes wobble, hysteresis, and/or backlash, and an uncertainty in reproducibility — limiting their practical usefulness to precision of 0.1 mm at best. Conversely, because of the, strictionless nature of a flexure based positioner, precision on the order of 1 nm are readily achievable. Also, because of the stiffness of a flexure design, maintaining a specific position is greatly enhanced. This sort of high precision and stiffness are mandatory in applications requiring (100 nm accuracy such as single mode fiber optic alignments integrated optics and pig tailing.) |
| |
Piezoelectricity or pressure-electricity is a property of some crystalline materials. When these materials are compressed, they produce a voltage proportional to the applied pressure. Conversely, when an electric field is applied across the material, there is a change in its shape. Piezo-ceramics can respond rapidly to changing input voltages (microsecond time constants) and their positional resolution is limited only by the noise of the power supply. Traditionally, high voltages (1 to 2 kV) were required to produce the desired extensions from the piezo material. This limited their acceptance because of the high cost of power supplies, noise, and reliability. CVI Melles Griot has developed a piezo electric material that operates in the 0 to 75 V range; eliminating the traditional problems associated with piezo actuators. These new state-of-the-art devices can be coupled to our line of flexure stages yielding a positioning device capable of 5 nm precision. |
| |
Piezoactuators are not ideal voltage-to-displacement transducers — they exhibit nonlinear properties of hysteresis and drift. Although these properties can be overcome by approaching the final destination from one direction (unidirectional approach), a more powerful technique to eliminate them is to use a "feedback control" loop. CVI Melles Griot has developed a range of piezoactuators with a closed loop position feedback sensor. The linearity response of these closed loop devices are better than ±0.5%, a d the noise equivalent motion is 5 nm. |
| |
The autoalignment piezoactuator controller, CVI Melles Griot's automatic alignment controller, is used with our piezoelectrically controlled positioners to simplify and speed up the time-consuming alignment procedures normally experienced when testing or fabricating single-mode fiber optical components. It makes alignment automatic, signal acquisition takes a fraction of a second, alignment is maintained indefinitely, and it compensates (in real time) for movements caused by environmental disturbances. |
| |
The elegant analog system used by the autoalignment piezoactuator controller employs a principle previously used by radar engineers to track their targets. By rotating the cone of light emitted from a source fiber, the light entering the target device is modulated at the frequency of rotation. This modulation is recovered by the autoalignment piezoactuator controller's detectors and compared to the phase of the signal used to rotate the source fiber. This information is decoded into vertical and horizontal components of displacement and used to close the loop on the source fiber. Consequently, this process brings the fiber and device into precise alignment. Displacement errors are decoded in a few cycles of modulation, typically several milliseconds; consequently, alignment is achieved in less than a second. |
| |
Unlike other alignment techniques, which use either programmed scanning algorithms or video processing techniques, the autoalignment piezoactuator controller's operation does not require a computer. It operates independently, ensuring at all times, that the critical axes are maintained in precise alignment. This occurs while other concurrent operations are carried out, usually under the control of a computer. |
| |
The autoalignment piezoactuator controller solves the major problems of: 1. Acquiring an initial throughput signal and then maximizing it through constant active adjustment of the appropriate axes of a piezo positioner — normally the vertical (Z) and horizontal axes (Y). 2. Compensating, in real time, for micrometer scale misalignment in Z and Y, caused by interaction between axes, as axial displacement (X), pitch (y), yaw (z), and roll (x) are adjusted for optimum throughput power. 3. Correcting environmental disturbances caused by temperature changes or vibrations. |
| |
In its more usual configuration, the autoalignment piezoactuator controller provides continuous and automatic optimization of coupled power, between, for example, a fiber and an I/O device - by servo controlling the vertical and horizontal axes of a positioner fitted with piezoelectric actuators. When a throughput signal is first acquired, the autoalignment piezoactuator controller immediately optimizes this signal by adjusting the vertical and horizontal position of the fiber. This takes a fraction of a second. Tracking is then initiated and the user is able, with the use of an additional positioner, such as a flexure roll stage to optimize the angular axes. |
| |
A pitch (y) adjustment will interact principally with the Z axis, causing vertical misalignment, yaw (θz) will tend to misalign Y, while roll (x) will interact with both Y and Z. However, the autoalignment piezoactuator controller actively compensates for any interaction between axes by constantly and automatically maximizing the vertical (Z), and horizontal (Y) axes. |
| |
A CRT display provides real-time visual control of the alignment process. It displays the autoalignment piezoactuator controller's operating parameters, indicating the extent and direction of the piezo electric movements, both vertically and horizontally — i.e., the position of the circle, and the modulation depth — i.e., the diameter of the circle. The upper right hand corner of the screen represents the maximum piezo extension position. By maintaining the scanning circle on the screen, the user ensures that piezo travel limits are not exceeded — and that loss of throughput signal never occurs. |
| |
It is practical to use more than one autoalignment piezoactuator controller in a single optical path simultaneously. To achieve this, a user must specify two controllers set to different scanning (modulation) frequencies. The autoalignment piezoactuator controller utilizes highly selective phase sensitive detectors, which detect only their own frequency. This allows multiple alignments to be achieved in a single optical path from a single detector. |
| |
Yes, the autoalignment piezoactuator controller has the ability to accommodate movements between a device and fiber during a pig tailing operation. However, when attaching fibers, two options are available, depending on the response of the throughput signal to the bonding process itself. 1. Remain in TRACK mode — The autoalignment piezoactuator controller follows any relative movements by constantly and automatically optimizing throughput power.
2. Switch to LATCH mode — this freezes the vertical and horizontal positions at optimum coupling. |
| |
Yes, the autoalignment piezoactuator controller is hardware rather than a software product. It is not based on a software algorithm but uses an instantaneous analog technique to accomplish alignment. |
| |
When you need to read absolute position at the nanometric level. For example in applications such as:
(a) Near-field measurements — where position and power levels must be mapped.
(b) When precise position adjustments are required - to compensate for misalignment during welding or soldering processes.
(c) Ultra critical control of the fiber standoff distance. |
| Product/PN | AutoCad
(pdf) | AutoCad
(dxf) | SolidWorks | Step | Manual | Spec
Sheet | Compliance
Documents | Catalog
Page | Press
Release | ROHS |
| 160 |
|
|
|
|
|
|
|
|
|
|
 |
Click Document title to view Document. |
|
|
|
|
|
|
|
|
|
|
See what's in stock NOW |
| Part Number | 0° Clear Aperture (mm) | 45° Clear Aperture (mm) | Description | Feature F | Mount Height D (mm) | Mount Length E (mm) | Mount Width F (mm) | Mounting Threads | Optic Center Height B (mm) | Optic Center Width C (mm) | Optic Pocket Depth A (mm) | Optic Size (mm) | Set Screw G | Price | Add
to
Cart | In
Stock |
| 160-05 | 10.7 | 7.6 | 12.7-mm 1.6" Moment Arm | 1/4-20/8-32 | 60.3 | 60.3 | 41.3 | - | 41.3 | 41.3 | 5.0 | 12.7 | 6-32 | $61 |  | Yes |
| 160-05-M | 10.6 | 7.5 | 12.7-mm 1.6" Moment Arm, Metric | M6/M4 | 60.3 | 60.3 | 41.3 | - | 41.3 | 41.3 | 5.0 | 12.7 | 6-32 | $61 | | Email |
| 160-05-3SC | 10.7 | 7.6 | 12.7-mm 1.6" Moment Arm, 3 screws | 1/4-20/8-32 | 60.3 | 60.3 | 41.3 | - | 41.3 | 41.3 | 5.0 | 12.7 | 6-32 | $76 | | Email |
| 160-10 | 23.4 | 16.3 | 25.4-mm 1.6" Moment Arm | 1/4-20/8-32 | 60.3 | 60.3 | 41.3 | - | 41.3 | 41.3 | 5.0 | 25.4 | 6-32 | $61 | | Yes |
| 160-10-M | 23.4 | 16.3 | 25.4-mm 1.6" Moment Arm, Metric | M6/M4 | 60.3 | 60.3 | 41.3 | - | 41.3 | 41.3 | 5.0 | 25.4 | 6-32 | $61 | | Yes |
| 160-10-3SC | 23.4 | 16.3 | 25.4-mm 1.6" Moment Arm, 3 screws | 1/4-20/8-32 | 60.3 | 60.3 | 41.3 | - | 41.3 | 41.3 | 5.0 | 25.4 | 6-32 | $76 | | Email |
| 160-10-LK | 23.4 | 16.3 | 25.4-mm 1.6" Moment Arm, Locking | 1/4-20/8-32 | 60.3 | 60.3 | 41.3 | - | 41.3 | 41.3 | 5.0 | 25.4 | 6-32 | $99 | | Yes |
| 160-10-3SC-LK | 23.4 | 16.3 | 25.4-mm 1.6" Moment Arm, 3 screws, Locking | 1/4-20/8-32 | 60.3 | 60.3 | 41.3 | - | 41.3 | 41.3 | 5.0 | 25.4 | 6-32 | $131 | | Yes |
| 160-B1 | - | - | Matching Base | - | - | - | - | - | - | - | - | - | - | $16 | | Email |
| 200-05 | 10.7 | 7.6 | 12.7-mm 2.0" Moment Arm | Yes | 69.9 | 69.9 | 44.5 | - | 50.8 | 50.8 | 8.0 | 12.7 | 6-32 | $74 | | Email |
| 200-05-3SC | 10.7 | 7.6 | 12.7-mm 2.0" Moment Arm, 3 screws | Yes | 69.9 | 69.9 | 44.5 | - | 50.8 | 50.8 | 8.0 | 12.7 | 6-32 | $90 | | Email |
| 200-05-LK | 10.7 | 7.6 | 12.7-mm 2.0" Moment Arm, Locking | Yes | 69.9 | 69.9 | 44.5 | - | 50.8 | 50.8 | 8.0 | 12.7 | 6-32 | $113 | | Email |
| 200-06 | 13.0 | 9.1 | 15.0-mm 2.0" Moment Arm | Yes | 69.9 | 69.9 | 44.5 | - | 50.8 | 50.8 | 8.4 | 15 | 6-32 | $74 | | Email |
| 200-06-3SC | 13.0 | 9.1 | 15.0-mm 2.0” Moment Arm Mirror Mount, 3 screws | Yes | 69.9 | 69.9 | 44.5 | - | 50.8 | 50.8 | 8.4 | 15 | 6-32 | $90 | | Email |
| 200-08 | 17.5 | 11.9 | 19.1-mm 2.0" Moment Arm | Yes | 69.9 | 69.9 | 44.5 | - | 50.8 | 50.8 | 8.4 | 19.1 | 6-32 | $74 | | Email |
| 200-08-3SC | 17.5 | 11.9 | 19.1-mm 2.0" Moment Arm, 3 screws | Yes | 69.9 | 69.9 | 44.5 | - | 50.8 | 50.8 | 8.4 | 19.1 | 6-32 | $90 | | Email |
| 200-10 | 23.4 | 16.3 | 25.4-mm 2.0" Moment Arm | Yes | 69.9 | 69.9 | 44.5 | - | 50.8 | 50.8 | 8.4 | 25.4 | 6-32 | $74 | | Email |
| 200-10-M | 23.4 | 16.3 | 25.4-mm 2.0" Moment Arm, Metric | Yes | 69.9 | 69.9 | 44.5 | - | 50.8 | 50.8 | 8.4 | 25.4 | 6-32 | $74 | | Email |
| 200-10-3SC | 23.4 | 16.3 | 25.4-mm 2.0" Moment Arm, 3 screws | Yes | 69.9 | 69.9 | 44.5 | - | 50.8 | 50.8 | 8.4 | 25.4 | 6-32 | $90 | | Email |
| 200-10-3SC-LK | 23.4 | 16.3 | 25.4-mm 2.0" Moment Arm, 3 screws, Locking | Yes | 69.9 | 69.9 | 44.5 | - | 50.8 | 50.8 | 8.4 | 25.4 | 6-32 | $145 | | Email |
| 200-10-M-3SC-LK | 23.4 | 16.3 | 25.4-mm 2.0" Moment Arm, Metric, 3 screws, Locking | Yes | 69.9 | 69.9 | 44.5 | - | 50.8 | 50.8 | 8.4 | 25.4 | 6-32 | $145 | | Yes |
| 200-10-LK | 23.4 | 16.3 | 25.4-mm 2.0" Moment Arm, Locking | Yes | 69.9 | 69.9 | 44.5 | - | 50.8 | 50.8 | 8.4 | 25.4 | 6-32 | $113 | | Email |
| 200-12 | 27.7 | 19.3 | 30-mm 2.0" Moment Arm | Yes | 76.2 | 76.2 | 44.5 | - | 50.8 | 50.8 | 8.0 | 30 | 6-32 | $101 | | Email |
| 200-12-3SC | 27.7 | 19.3 | 30-mm 2.0" Moment Arm, 3 screws | Yes | 76.2 | 76.2 | 44.5 | - | 50.8 | 50.8 | 8.0 | 30 | 6-32 | $119 | | Email |
| 200-1.25 | 29.7 | 20.3 | 31.8-mm 2.0" Moment Arm | Yes | 76.2 | 76.2 | 44.5 | - | 50.8 | 50.8 | 8.4 | 31.8 | 6-32 | $101 | | Email |
| 200-15 | 34.3 | 23.9 | 38.1-mm 2.0" Moment Arm | Yes | 76.2 | 76.2 | 44.5 | - | 50.8 | 50.8 | 8.4 | 38.1 | 6-32 | $101 | | Yes |
| 200-15-M | 34.3 | 0.94 | 38.1-mm 2.0" Moment Arm, Metric | Yes | 76.2 | 76.2 | 44.5 | - | 50.8 | 50.8 | 8.4 | 38.1 | 6-32 | $101 | | Yes |
| 200-15-LK | 34.3 | 23.9 | 38.1-mm 2.0" Moment Arm, Locking | Yes | 76.2 | 76.2 | 44.5 | - | 50.8 | 50.8 | 8.4 | 38.1 | 6-32 | $140 | | Yes |
| 200-15-3SC | 34.3 | 23.9 | 38.1-mm 2.0" Moment Arm, 3 screws | Yes | 76.2 | 76.2 | 44.5 | - | 50.8 | 50.8 | 8.4 | 38.1 | 6-32 | $122 | | Email |
| 200-20 | 46.7 | 32.8 | 50-mm.8 2.0" Moment Arm | Yes | 85.6 | 85.6 | 44.5 | - | 50.8 | 50.8 | 8.0 | 50.8 | 6-32 | $101 | | Yes |
| 200-20-M | 46.7 | 32.7 | 50.8-mm 2.0" Moment Arm, Metric | Yes | 85.6 | 85.6 | 44.5 | - | 50.8 | 50.8 | 8.0 | 50.8 | 6-32 | $101 | | Yes |
| 200-20-3SC | 46.7 | 32.8 | 50.8-mm 2.0" Moment Arm, 3 screws | Yes | 85.6 | 85.6 | 44.5 | - | 50.8 | 50.8 | 8.0 | 50.8 | 6-32 | $119 | | Yes |
| 200-20-LK | 46.7 | 32.8 | 50.8-mm 2.0" Moment Arm, Locking | Yes | 85.6 | 85.6 | 44.5 | - | 50.8 | 50.8 | 8.0 | 50.8 | 6-32 | $140 | | Yes |
| 200-20-M-3SC-LK | 46.7 | 32.7 | 50.8-mm 2.0" Moment Arm, Metric, 3 screws, Locking | Yes | 85.6 | 85.6 | 44.5 | - | 50.8 | 50.8 | 8.0 | 50.8 | 6-32 | $174 | | Email |
| 200-B1 | | | Matching Base | | - | - | - | - | - | - | - | - | - | $16 | | Yes |
| 260-15 | 34.3 | 23.9 | 50.8-mm 2.6" Moment Arm | Yes | 88.9 | 88.9 | 50.8 | - | 63.5 | 63.5 | 8.0 | 38.1 | M4 | $123 | | Email |
| 260-15-3SC | 34.3 | 23.9 | 50.8-mm 2.6" Moment Arm, 3 screws | Yes | 88.9 | 88.9 | 50.8 | - | 63.5 | 63.5 | 8.0 | 38.1 | M4 | $138 | | Email |
| 260-15-3SC-LK | 34.3 | 23.9 | 50.8-mm 2.6" Moment Arm, 3 screws, Locking | Yes | 88.9 | 88.9 | 50.8 | - | 63.5 | 63.5 | 8.0 | 38.1 | M4 | $193 | | Email |
| 260-15-LK | 34.3 | 23.9 | 50.8-mm 2.6" Moment Arm, Locking | Yes | 88.9 | 88.9 | 50.8 | - | 63.5 | 63.5 | 8.0 | 38.1 | M4 | $162 | | Email |
| 260-20 | 46.7 | 32.8 | 50.8-mm 2.6" Moment Arm | Yes | 95.3 | 95.3 | 50.8 | - | 63.5 | 63.5 | 8.0 | 50.8 | M4 | $123 | | Yes |
| 260-20-M | 46.7 | 32.7 | 50.8-mm 2.6" Moment Arm, Metric | Yes | 95.3 | 95.3 | 50.8 | - | 63.5 | 63.5 | 8.0 | 50.8 | M4 | $123 | | Email |
| 260-20-M-LK | 46.7 | 32.7 | 50.8-mm 2.6" Moment Arm, Metric, Locking | Yes | 95.3 | 95.3 | 50.8 | - | 63.5 | 63.5 | 8.0 | 50.8 | M4 | $162 | | Email |
| 260-20-3SC | 46.7 | 32.8 | 50.8-mm 2.6" Moment Arm, 3 screws | Yes | 95.3 | 95.3 | 50.8 | - | 63.5 | 63.5 | 8.0 | 50.8 | M4 | $138 | | Yes |
| 260-30 | 71.1 | 49.8 | 76.2-mm 2.6" Moment Arm | Yes | 111.3 | 111.3 | 50.8 | - | 63.5 | 63.5 | 8.0 | 76.2 | M4 | $138 | | Yes |
| 260-30-3SC | 71.1 | 49.8 | 76.2-mm 2.6" Moment Arm, 3 screws | Yes | 111.3 | 111.3 | 50.8 | - | 63.5 | 63.5 | 8.0 | 76.2 | M4 | $155 | | Yes |
| 260-30-3SC-LK | 71.1 | 49.8 | 76.2-mm 2.6" Moment Arm, 3 screws, Locking | Yes | 111.3 | 111.3 | 50.8 | - | 63.5 | 63.5 | 8.0 | 76.2 | M4 | $210 | | Email |
| 260-B1 | - | - | Matching Base | - | - | - | - | - | - | - | - | - | - | $16 | | Yes |
| 310-20 | 46.7 | 32.8 | 50.8-mm 3.1" Moment Arm | - | 110.8 | 110.5 | 52.3 | - | 63.5 | 63.5 | 11.1 | 50.8 | 8-32 | $180 | | Email |
| 310-20-3SC | 46.7 | 32.8 | 50.8-mm 3.1" Moment Arm, 3 screws | - | 110.8 | 110.8 | 52.3 | - | 63.5 | 63.5 | 11.1 | 50.8 | 8-32 | $196 | | Email |
| 310-30 | 71.1 | 49.8 | 76.2-mm 3.1" Moment Arm | - | 111.1 | 111.1 | 52.3 | - | 63.5 | 63.5 | 11.1 | 76.2 | 8-32 | $197 | | Yes |
| 310-30-3SC | 71.1 | 49.8 | 76.2-mm 3.1" Moment Arm, 3 screws | - | 111.1 | 111.1 | 52.3 | - | 63.5 | 63.5 | 11.1 | 76.2 | 8-32 | $214 | | Email |
| 310-40 | 96.5 | 67.6 | 101.6-mm 3.1" Moment Arm | - | 136.7 | 136.7 | 52.3 | - | 76.2 | 76.2 | 11.1 | 101.6 | 8-32 | $219 | | Yes |
| 310-40-3SC | 96.5 | 67.6 | 101.6-mm 3.1" Moment Arm, 3 screws | - | 136.7 | 136.7 | 52.3 | - | 76.2 | 76.2 | 11.1 | 101.6 | 8-32 | $236 | | Yes |
| 310-B1 | - | - | Matching Base | - | - | - | - | - | - | - | - | - | - | $26 | | Yes |
|
|
|
|